Yaesu FT DX 9000 CONTEST - 2, Руководство по эксплуатации

Страница: 94 / 168

Page 92 FT
DX
9000 C
ONTEST
O
PERATION
M
ANUAL
CW C
ONVENIENCE
F
EATURES
TEXT Memory
The five channels of CW message memory (up to 50 characters total) may also be programmed using a text-entry tech-
nique. This technique is somewhat slower than when you send the message directly from your keyer paddle, but accuracy
of character spacing is ensured.
Example 1
: CQ CQ CQ DE W6DXC K} (20 characters)
Now we will utilize another powerful feature of the CW Memory Keyer, the sequential contest number (“Countup”) fea-
ture.
Example 2
: 599 10 200 # K} (15 characters)
C
ONTEST
M
EMORY
K
EYER
Text Memory Storage
1 Press the MNU key (# ) to enter the Menu mode.
2. Rotate the Main Tuning Dial (# ) to select the
CW Memory Register into which you wish to store
the message; we are now selecting the message entry
technique (Text entry).
FH-2SET 023 CW MEMORY 1
FH-2SET 024 CW MEMORY 2
FH-2SET 025 CW MEMORY 3
FH-2SET 026 CW MEMORY 4
FH-2SET 027 CW MEMORY 5
3. Rotate the CLAR/VFO-B knob (# ) to set the
selected Memory Register to “TEXT.”
4. Press and hold in the MNU key for two seconds to
save the new settings and exit.
Contest Number Programming
Use this process if you are starting a contest, or of you
somehow get out of sync with the proper number in the
middle of a contest.
1. Press the FH-2’s DEC key for two seconds. The
current Contest Number will be displayed.
2. Rotate the Main Tuning Dial to set the Contest
Number to the desired value.
3. Press the DEC key for two seconds to store the
new number.
Decrementing the Contest Number
Use this process if the current contest number gets
slightly ahead of the actual number you want to send
(in case of a duplicate QSO, for example).
Press the FH-2’s DEC key momentarily. The current
Contest Number will be reduced by one. Press the
DEC key as many times as necessary to reach the
desired number. If you go too far, use the “Contest Num-
ber Programming” technique described above.
TEXT
!
”
$
%
&
’
(
)
+
,
-
CW
SN
AF
SX
KA
AS
WG
KN
KK
AR
MIM
DU
CW
AAA
DN
OS
KR
BT
SK
IMI
HH
AL
IQ
TEXT
.
/
:
;
=
|
?
_
Advice
By referring to the chart, you may view the characters avail-
able for message entry (both capital and small letters, plus
numbers and a few punctuation marks, are available).
Note that some punctuation and other marks (
>
) are
listed, but they are displayed only and cannot be transmitted.
LOCK
OFF ON
CLAR/VFO-B knob
MNU key Main Tuning Dial