Yaesu FT DX 9000 CONTEST - 2, Руководство по эксплуатации

Страница: 35 / 168

Page 33 FT
DX
9000 C
ONTEST
O
PERATION
M
ANUAL
B.MODE/CLEAR Switch
B.MODE Switch
When the A/B switch (# below) is pressed, and
the Orange lamp to the right of the CLAR/VFO-B
knob (#
, described previously) lights up, pressing
the B.MODE/CLEAR switch allows you to rotate
this knob for selection of the operating mode to be
used on the VFO-B.
CLEAR Switch
When the CLAR switch (# , described previously)
is pressed (and its imbedded LED is illuminated),
pressing the B.MODE/CLEAR switch clears out any
frequency offset you have programmed into the Clari-
fier register (thereby setting the offset to “Zero”).
A/B Switch
The A/B switch controls the determines whether
the actions of the CLAR/VFO-B knob (#
, de-
scribed previously) will be applied to the VFO-A
(“CLAR” option), or the VFO-B (“VFO-B option”).
Pressing this switch once causes the Orange lamp to
the right of the CLAR/VFO-B knob to light up; in
this case, rotation of the CLAR/VFO-B knob af-
fects operation on the VFO-B band (tuning, etc.).
Pressing the A/B switch once more causes the Or-
ange lamp to turn off; in this instance, rotation of the
CLAR/VFO-B knob affects operations associated
with the VFO-B (Clarifier function, etc.).
FAST/RX Switch
FAST Switch
When the A/B switch (# , described later) is
pushed, and the Orange lamp to the right of the
CLAR/VFO-B knob lights up, the CLAR/VFO-
B knob (# above) will be controlling the VFO-B
frequency; pressing the FAST/RX switch will in-
crease the tuning rate by a factor of 10.
RX Switch
When the CLAR switch (# , described previously)
is pressed (and its imbedded LED is illuminated),
pressing the FAST/RX switch applies the pro-
grammed Clarifier offset to the VFO-A receive fre-
quency. Press the FAST/RX switch once more to
return the VFO-A to the frequency shown on the main
frequency display field; the Clarifier offset will still
be present, though, in case you want to use it again.
To cancel the Clarifier offset, press the B.MODE/
CLEAR switch (#
, described later).
BAND/MHz / TX Switch
BAND/MHz
When the A/B switch (# , described later) is
pressed, and the Orange lamp to the right of the
CLAR/VFO-B knob (# , described previously)
lights up, pressing the BAND/MHz switch allows
you to rotate this knob for selection of the Amateur
band to be used for the VFO-B.
TX Switch
When the CLAR switch (# , described previously)
is pressed (and its imbedded LED is illuminated),
pressing the BAND/MHz / TX switch applies the
programmed Clarifier offset to the VFO-A transmit
frequency. Press the FAST/RX switch (
, above)
once more to return the transmitter to the VFO-A fre-
quency shown on the main frequency display field;
the Clarifier offset will still be present, though, in case
you want to use it again. To cancel the Clarifier offset,
press the B.MODE/CLEAR switch (#
, described
later).
F
RONT
P
ANEL
C
ONTROLS