3
Safety Precautions
FT-891 Operating Manual
WARNING
Do not use voltages other than the speci-
fied power supply voltage.
Doing so may result in fire and electric shock.
Do not transmit continuously for long pe-
riods of time.
This may cause the temperature of the main
body to rise and result in burns and failures
due to overheating.
Do not dismantle or modify the device.
This may result in injury, electric shock and
equipment failure.
Do not handle the power plug and connec-
tor etc. with wet hands. Also do not plug
and unplug the power plug with wet hands.
This may result in injury, liquid leak, electric
shock and equipment failure.
When smoke or strange odors are emitted
from the radio, turn off the power and dis-
connect the power cord from the socket.
This may result in fire, liquid leak, overheat-
ing, damage, ignition and equipment failure.
Please contact our company amateur custom-
er support or the retail store where you pur-
chased the device.
Keep the power plug pins and the sur-
rounding areas clean at all times.
This may result in fire, liquid leak, overheating,
breakage, ignition etc.
Disconnect the power cord and connec-
tion cables before incorporating items sold
separately and replacing the fuse.
This may result in fire, electric shock and
equipment failure.
Never cut off the fuse holder of the DC
power cord.
This may cause short-circuiting and result in
ignition and fire.
Do not use fuses other than those speci-
fied.
Doing so may result in fire and equipment
failure.
Do not allow metallic objects such as wires
and water to get inside the product.
This may result in fire, electric shock and
equipment failure.
Do not place the device in areas that may
get wet easily (e.g. near a humidifier).
This may result in fire, electric shock and
equipment failure.
When connecting a DC power cord, pay
due care not to mix up the positive and
negative polarities.
This may result in fire, electric shock and
equipment failure.
Do not use DC power cords other than the
one enclosed or specified.
This may result in fire, electric shock and
equipment failure.
Do not bend, twist, pull, heat and modify
the power cord and connection cables in
an unreasonable manner.
This may cut or damage the cables and result
in fire, electric shock and equipment failure.
Do not pull the cable when plugging and
unplugging the power cord and connec-
tion cables.
Please hold the plug or connector when un-
plugging. If not, this may result in fire, electric
shock and equipment failure.
Refrain from using headphones and ear-
phones at a loud volume.
Continuous exposure to loud volumes may
result in hearing impairment.
Do not use the device when the power cord
and connection cables are damaged, and
when the DC power connector cannot be
plugged in tightly.
Please contact our company amateur custom-
er support or the retail store where you pur-
chased the device as this may result in fire,
electric shock and equipment failure.
Follow the instructions given when install-
ing items sold separately and replacing the
fuse.
This may result in fire, electric shock and
equipment failure.
Do not use the device when the alarm goes
off.
For safety reasons, please pull the power plug
of the DC power equipment connected to the
product out of the AC socket.
Never touch the antenna as well. This may
result in fire, electric shock and equipment
failure due to thunder.
