37
FT-891 Operating Manual
Operation on 60-Meter (5 MHz) Band (U.S. and U.K. Version Only)
The recently authorized 60-meter band is covered, in the FT-891, by fixed memory
channels. These channels are set to USB or CW, and they appear between the “last”
PMS channel (“P9U”) and the first “regular” memory channel (“M01”):
1. While operating in the VFO mode, press the
[
V/M
] key to enter the Memory mode.
2. Rotate the
MULTI
function knob to select
the desired memory channel.
Memory channels (“501” through “510”)
are preprogrammed, at the factory, with the
permitted frequencies in the 5 MHz band,
and the USB or CW mode is automatically
selected on these channels.
NOTE:
In each of the following conditions,
memory channels may be selected
by pressing and then rotating the
MULTI
function knob:
● When the mark is indicated to the
left of the function key status icon.
● When the display of channel num-
ber status is “
” (example of
channel number “501”).
3. To exit from 60-meter (5 MHz) operation and
return to the VFO mode, just press the
[
V/M
] or
[
A/B
] key.
Channel Number
Channel Number
Mark
Channel
Number
Frequency
U.S. Version
U.K. Version
501
5.332000 MHz (SSB)
5.260000 MHz (SSB)
502
5.348000 MHz (SSB)
5.280000 MHz (SSB)
503
5.358500 MHz (SSB)
5.290000 MHz (SSB)
504
5.373000 MHz (SSB)
5.368000 MHz (SSB)
505
5.405000 MHz (SSB)
5.373000 MHz (SSB)
506
5.332000 MHz (CW)
5.400000 MHz (SSB)
507
5.348000 MHz (CW)
5.405000 MHz (SSB)
508
5.358500 MHz (CW)
-
509
5.373000 MHz (CW)
-
510
5.405000 MHz (CW)
-
