SPECIFICATIONS
General
Frequency Range: RX: 28.000 - 29.700 MHz, 50.000 - 54.000 MHz,
108.000 - 180.000 MHz, 320.000 - 480.000 MHz,
700 - 985 MHz (Cellular Blocked)
TX: 28.000 - 29.700 MHz, 50.000 - 54.000 MHz,
144.000 - 146.000 MHz (or 144.000 - 148.000 MHz),
430.000 - 440.000 MHz (or 430.00 - 450.000 MHz)
Frequency Steps: 5/10/12.5/15/20/25/50 kHz
Operating Modes: F3, F2
Antenna Impedance: 50 Ohms, unbalanced (Antenna Duplexer built-in)
Frequency Stability:
±
5 ppm @ 14
°
F ~ +140
°
F (
–
10
°
C ~ +60
°
C)
Operating Temperature Range:
–
4
°
F ~ +140
°
F (
–
20
°
C ~ +60
°
C)
Supply Voltage: 13.8 VDC (
±
15%), negative ground
Current Consumption (Approx.): RX: 0.5 A (Squelched)
TX: 8.0 A (50/430 MHz), 8.5 A (29/144 MHz)
Case Size (W x H x D): 5.5" x 1.6" x 6.6" (140 x 41.5 x 168 mm)
(w/o knobs & connectors)
Weight (Approx.): 2.2 lb (1 kg)
Transmitter
Power Output: 50/20/10/5 W (29/50/144 MHz),
35/20/10/5 W (430 MHz)
Modulation Type: Variable Reactance
Maximum Deviation:
±
5 kHz
Spurious Radiation: Better than
–
60 dB
(29 MHz: Better than
–
50 dB)
Modulation Distortion: Less than 3%
Microphone Impedance: 2 k
Ω
DATA Jack Impedance: 10 k
Ω
Receiver
Circuit Type: Double-conversion superheterodyne
Intermediate Frequencies: 45.05 MHz/450 kHz (Left band),
47.25 MHz/450 kHz (Right band)
Sensitivity (for 12dB SINAD): Better than 0.2
µ
V
Squelch Sensitivity: Better than 0.16
µ
V
Selectivity (
–
6dB/
–
60dB): 12 kHz/30 kHz
Maximum AF Output: 2 W @ 8
Ω
for 5% THD
AF Output Impedance: 4-16
Ω
About this brochure: we have made this brochure as comprehensive and factual as possible. We reserve the right, however, to make changes at any time in equipment, optional accessories,
specifications, model numbers, and availability. Precise frequency range may be different in some countries. Some accessories shown herein may not be available in some countries. Some
information may have been updated since the time of printing; please check with your Authorized Yaesu Dealer for complete details.
MH-48
A6J
DTMF Microphone
(supplied in U.S.A.
version)
MH-42
B6JS
Hand Microphone
(supplied w/European and
Asian versions)
OPTIONS
YSK-8900
Separation Kit
MEK-2
Microphone Extension Kit
(for use with Yaesu 8-pin
Microphones)
CT-39A
Packet Interface Cable
MLS-100
High-Power
External Speaker
2002.0730NS(U/E)
Printed in Japan
B9200396
VERTEX STANDARD CO., LTD.
For the latest Yaesu news,visit us on the Internet:
4-8-8 Nakameguro, Meguro-ku, Tokyo 153-8644, Japan
VERTEX STANDARD
US Headquarters
10900 Walker Street, Cypress, CA 90630, U.S.A.
International Division
8350 N.W. 52nd Terrace, Suite 201, Miami, FL 33166, U.S.A.
YAESU EUROPE B.V.
P.O. Box 75525, 1118 ZN Schiphol, The Netherlands
YAESU UK LTD.
Unit 12, Sun Valley Business Park, Winnall Close
Winchester, Hampshire, SO23 0LB, U.K.
VERTEX STANDARD HK LTD.
Unit 5, 20 /F., Seaview Centre, 139-141 Hoi Bun Road,
Kwun Tong, Kowloon, Hong Kong
http://www.vxstdusa.com http://www.yaesu.co.uk
Phone 714/827-7600; Fax 714/827-8100
Email: [email protected]
Email: [email protected]
Specifications are subject to change without notice, and are
guaranteed within the 29, 50,144, and 430 MHz amateur bands
only. Frequency ranges will vary according to transceiver version;
check with your dealer.
Available functions of
Programmable Microphone Keys:
SQL Off
Opens squelch to allow
reception of weak signals.
RPTR
Allows setting of
repeater shift.
PRI
Activates Priority
Channel operation.
LOW
Sets transmitter
output power level.
MHz
Configures Main Dial for
tuning in 1 MHz steps.
SCAN
REV
Allows reversal of uplink/
downlink frequencies.
HOME
Activates Home
Channel operation.
BAND
Toggles Main and
Sub bands on display.
VFO/MR
Toggles operation
between VFO and
Memory modes.
P1
Programmable Key
Default function:
same as BAND Key.
P 2
Programmable Key
Default function:
same as V/M Key
P 3
Programmable Key
Default function: same
as TONE key.
P 4
Programmable Key:
Default function: same
as LOW key.
UP/DOWN
Keys:
Provide VFO channel stepping
or Memory Channel selection.
PTT
Switch:
Press to Transmit.
FP-1030A
AC Power Supply (30 A)
FP-1023
(U.S.A. only)
AC Power Supply (25 A)
DIAL
Knob (Left Band)
Frequency Selection
Main/Sub Band Selection
Hyper Memory
Selection Keys
Squelch
Knob
(Left Band)
Volume
Knob
(Left Band)
Left Band
Command Keys
Left Band
Display Field
Right Band
Display Field
Right Band
Command Keys
Volume
Knob
(Right Band)
Squelch
Knob
(Right Band)
DIAL
Knob (Right Band)
Frequency Selection
Main/Sub Band Selection
Set Mode
Key
WIRES
Internet Key
DTMF/Direct Freq. Input
MMB-62
Remote Front Panel
Mounting Bracket
When the "Main" band is
set to the Memory mode,
press and hold in this
button for 1/2 second to
set up the Scan Skip List
or Preferential Scan List.
