Yaesu FT-847, Руководство по эксплуатации

Страница: 72 / 108

70
FT-847 O
PERATING
M
ANUAL
The FT-847’s Memory System provides a wide variety of facilities which enhance operating efficiency and conve-
nience. The Memory System stores frequency, operating mode, bandwidth, repeater offset and tone data, and
C
LARIFIER
information, to minimize the need to reset controls each time a memory channel is recalled. The features
of the Memory System are described on the pages to follow.
QMB (Q
UICK
M
EMORY
B
ANK
)
A convenient QMB channel is available, providing instantaneous storage and recall of an urgently-needed fre-
quency (for example, a DX station which is not currently listening for your call area).
QMB M
EMORY
S
TORAGE
/R
ECALL
•
While operating in the VFO mode, press the [ QMB
STO
] key momentarily to store the frequency.
Note :The QMB system is capable of memorizing:
l
Operating frequency
l
Operating mode
l
Receiver filter (Wide/Narrow)
l
Clarifier information (direction and magni-
tude)
l
Repeater shift information (direction and
magnitude)
l
Packet baud rate
‚
Press the [ QMB RCL ] key momentarily to recall
the current QMB channel. The “
SP
” (“ SP ecial
Memory”) designator will appear in the Memory
Channel window.
ƒ
Press the [ QMB RCL ] key once more to return to
the previous frequency (either a VFO frequency or
a Memory channel).
MEMORY OPERATION
Note : If you move the MAIN VFO Tuning Dial or the
VFO/MEM CH
knob while in the QMB
Memory mode, you can change frequencies as
if you were in a “VFO” mode. When this is done,
the “
MT
” (Memory Tune) icon will appear on
the display. Press the [
QMB RCL
] key once
more to return to the originally-stored QMB fre-
quency.