manualshive.com logo in svg

Yaesu FT-7100M, Руководство по эксплуатации

Поделиться
Скачать
Yaesu FT-7100M Скачать руководство пользователя страница 47

45

FT-7100M Operating Manual

E

XTERNAL

 S

PEAKER

 S

ELECTION

You can select the audio output configuration for the speakers when an external speaker  is
connected to the 

EXT SP

 jack on the rear panel.

To select the speaker to be used on a particular band:

1. Press and hold in the [

BAND

] key for 1/2 second to activate the “Menu” mode.

2. Rotate the 

Main Dial

 knob to select Menu #28 (

SPCNT

).

3. Press the [

BAND

] key momentarily to enable changing of this Menu item.

4. Rotate the 

Main Dial

 knob to select the new setting. The options include:

BAND A

: Directs VHF band audio to the external speaker, and UHF band audio to the

internal speaker. During V-V operation (VHF) audio from the upper frequency
display field on the LCD is sent to the external speaker, while (VHF) audio
from the lower frequency display field on the LCD is sent to the internal
speaker. Conversely, during U-U operation, upper-display-field UHF audio
is sent to the 

internal

 speaker, and lower-display-field UHF audio is sent to

the 

external

 speaker.

BAND B

: Directs UHF band audio to the external speaker, and VHF band audio to the

internal speaker. During V-V operation (VHF) audio from the upper frequency
display field on the LCD is sent to the internal speaker, while (VHF) audio
from the lower frequency display field on the LCD is sent to the external
speaker. Conversely, during U-U operation, upper-display-field UHF audio
is sent to the 

external

 speaker, and lower-display-field UHF audio is sent to

the 

internal

 speaker.

BOTH

:

Outputs both VHF and UHF band audio from the external speaker, and turns
off the internal speaker.

OFF

:

Turns off the external speaker, and outputs both VHF and UHF band audio
from the internal speaker.

5. Press and hold in the

 

[

BAND

] key for 1/2 second to save the new configuration and exit

to normal operation.

Some or all transceiver settings can be reset to their factory-default states using one of the
following power-on routines:

M

ISCELLANEOUS

 S

ETTINGS

Содержание FT-7100M





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды