Yaesu FT-7100M Скачать руководство пользователя страница 14

Страница: 14 / 60

FT-7100M Operating Manual

RONT

ANEL

ONTROLS

, S

WITCHES

VOL - SQL

(“main” band) Controls

The inner

VOL

control adjusts the speaker audio level from the “main” band receiver

(default: VHF is the

upper

band on the display). Clockwise rotation increases the audio

level.
The outer

SQL

control is used to silence background noise on the “main” band receiver.

It should advanced clockwise just to the point where the noise silenced (and the green
“main”

BUSY/TX

Indicator turns off), so as to provide the best sensitivity to weak

signals.

VOL - SQL

(“sub” band) Controls

The inner

VOL

control adjusts the speaker audio level from the “sub” band receiver

(default: UHF is the

lower

band on the display). Clockwise rotation increases the audio

level.
The outer

SQL

control is used to silence background noise on the “sub” band receiver.

It should advanced clockwise just to the point where the noise silenced (and the green
“sub”

BUSY

Indicator turns off), so as to provide the best sensitivity to weak signals.

BUSY/TX

Indicator (“main” band)

This dual-color LED glows Green when a signal is being received on the “main” band
channel. This LED glows Red when you are transmitting.

BUSY

Indicator (“sub” band)

This LED glows Green when a signal is being received on the “sub” band channel.

Command Keys

These four keys select many of the most important operating features on the

FT-7100M

[

BAND

] Key: Pressing this key switches “main” band control between the VHF band

and UHF band. Press and hold in this key for 1/2 second to activate the “Menu” mode.

Содержание FT-7100M





























































Результаты поиска

Содержание FT-7100M

Отзывы:

Бренды по названию

Популярные бренды

Yaesu FT-7100M, Руководство по эксплуатации

Результаты поиска

Содержание FT-7100M

Отзывы:

Бренды по названию

Популярные бренды