Menu Bar
File menu
New
Open a new configuration file from the disk drive.
Click the [New] parameter in the [File] menu to open the Memory Programmer default
configuration file.
The default settings are set in the default configuration file.
This [New] menu screen operates the same, either by using the dropdown lists, or by
clicking on the icons, as shown in the figures above.
Open
Open a previously-saved configuration file from the disk.
Click the [Open] parameter in the [File] menu, a pop-up window appears which shows all
the saved files in the specified path.
This [Open] button operates the same as the right icon in the figures above.
Save
Save the programming session to the disk with the same name and directory.
Click the [Save] parameter in the [File] menu, a caution message will appear. If you
agree to over-write the current file, click [OK].
This [Save] button operates the same as the right icon in the figure above.
Save as
Save the programming session to the disk with a new name.
Click the [Save As] parameter in the [File] menu, a pop-up window will appear which dis-
plays all the current files saved to the specified path.
To save the programming session with a new name, type the new file name in the bot-
tom box, then click [OK].
Exit
Exit the program and close the window.
13
FT-65R/E FT-25R/E Memory Programmer
