Basic Operation
Set the Comm Port Number of the SCU-35 driver
1. Click the [Set COM] parameter in the [Set]
menu.
The “Communication Setting” window will
open.
The [Set COM] parameter may also be
set by clicking the logo.
2. Select the Comm Port Number, then click
[OK].
The Comm Port Number of the SCU-35
driver will be shown in step 8 of the “SCU-35
Driver Software Installation” procedure.
Read the settings from the transceiver
To write the settings to the transceiver, see
1. Click the [Read From Radio] parameter in the
[Program] menu.
The [Read From Radio] parameter may
also be set by clicking the logo.
2. The confirmation popup window will open,
then click [OK].
The completion percentage popup window
will appear.
3. If reading is successful, the popup window
will open, then click [OK].
10
FT-65R/E FT-25R/E Memory Programmer
