FT-60R O
PERATING
M
ANUAL
32
D
ELETING
M
EMORIES
You may desire to delete the memories (except the Memory Channel “1” and Home Chan-
nel). The procedure for deleting a channel is quite simple.
1.
Press the [
V/M
(
PRI
)] key, if needed, to enter the MR mode.
2.
Press and hold in the [
F/W
] key for one second, then rotate the DIAL knob to select
the memory channel to be “deleted.”
3.
Press the [
HM/RV
] key momentarily. The display will revert to memory channel #1.
The previously-selected memory will be deleted.
Important Notice! Once deleted, the channel data cannot be recovered!
M
OVING
M
EMORY
D
ATA
TO
THE
VFO
Data stored on memory channels can easily be moved to the VFO, if you like.
1.
Select the memory channel containing the frequency data to be moved to the VFO.
2.
Press the [
BAND
(
BAND DN
)] key momentarily to activate the “Memory Tune” fea-
ture temporarily, then press and hold in the [
BAND
(
BAND DN
)] key for one second.
The data will now have been copied to the VFO, although the original memory con-
tents will remain intact on the previously-stored channel.
If a Split Frequency Memory channel was transferred, the TX frequency will
be ignored (you will be set up for Simplex operation on the Receive frequency).
M
EMORY
M
ODE
