FT-60R O
PERATING
M
ANUAL
29
M
EMORY
M
ODE
M
EMORY
R
ECALL
1.
While operating in the VFO mode, press the [
V/M
(
PRI
)] key to enter the Memory
mode.
2.
Rotate the
DIAL
knob to select the desired channel.
3.
To return to the VFO mode, press the [
V/M
(
PRI
)] key.
When the radio is already set to the Memory mode, an easy way to recall memories is to
key in the memory channel number, then press the [
F/W
] key.
For example
, to recall memory channel #14, press [
1
]
[
4
]
[
F/W
].
You may also recall the Memory Channel #000 and Programmable Memory channels (“L01/
U01” through “L50/U50.”) using the following numbers: Memory Channel #000 = “1000,”
Programmable Memory channels #L1 = “1001,” U1 = “1002,” L50 = “1099,” and U50 =
“1100.”
HOME C
HANNEL
M
EMORY
A special one-touch “HOME” channel is available for each of operating bands, to allow
quick recall of a favorite operating frequency on each band.
Home Channel storage is simple to accomplish:
1.
Change the setting of Set Mode Item 35:
REV
/
HM
from “
REV
” to “
HOME
,” if it is not
already set to this option (see page 75).
2.
Select the desired frequency, while operating in the VFO mode. Be sure to set up any
desired CTCSS or DCS tones, as well as any desired repeater offset. The power level
may also be set at this time, if you wish to store it.
3.
Press and hold in the [
F/W
] key for one second.
4.
While the memory channel number is blinking, just press the [
HM/RV
] key. The fre-
quency and other data (if any) will now be stored in the special HOME channel regis-
ter.
5.
You may repeat this process on the other operating bands.
6.
To recall the HOME channel,
press the [
HM/RV
] key momen-
tarily while operating either in the
VFO or MR mode.
The UHF HOME channel is the one used during “Emergency channel op-
eration.” See page 46 for details regarding this feature.
F
REQUENCY
146.520 MHz
250.000 MHz
350.000 MHz
446.000 MHz
850.000 MHz
B
AND
144 MHz Band
250 MHz Band
350 MHz Band
430 MHz Band
850 MHz Band
D
EFAULT
H
OME
C
HANNELS
