FT-60R O
PERATING
M
ANUAL
30
L
ABELING
M
EMORIES
You may wish to append an alpha-numeric “Tag” (label) to a memory or memories, to aid
in recollection of the channel’s use (such as a club name, etc.). This is easily accomplished
using the Set Mode.
1.
Recall the memory channel on which you wish to append a la-
bel.
2.
Press the [
F/W
] key, then press the [
0
(
)
SET
] key to enter the
Set mode.
3.
Rotate the
DIAL
knob to select Set Mode Item 28:
NM WRT
.
4.
Press the [
F/W
] key momentarily to display the previously stored
label (if any).
5.
Press the [
F/W
] key again to clear any previous label.
6.
Rotate the
DIAL
knob to select the first digit of the desired la-
bel.
7.
Press the [
F/W
] key to move to the next character.
8.
If you make a mistake, press the [
(
MHz
)] key to back-space the cursor, then re-enter
the correct letter, number, or symbol.
9.
Repeat steps 5 through 7 to program the remaining letters, numbers, or symbols of the
desired label. A total of six characters may be used in the creation of a label.
10. When you have programmed a label which is under 6 characters, press and hold in the
[
F/W
] key for one second to confirm the label (if the label is
exactly 6 characters in length, you do not need to press and hold
in [
F/W
]).
11. When you have completed the creation of the label, press the
PTT
key to save the
label and exit.
To display the alpha-numeric “Tag” (label):
1.
Set the
FT-60R
to the “MR” (Memory Recall) mode, and recall
the memory channel on which you wish to display its label.
2.
Press the [
F/W
] key, then press the [
0
(
)
SET
] key to enter the
Set mode.
3.
Rotate the
DIAL
knob to select the Set Mode Item labeled 27:
NAME
.
4.
Press the [
F/W
] key momentarily to enable adjustment of this
Item’s setting.
5.
Rotate the
DIAL
knob to set this Set Mode Item to “
ALPHA
”
(thus enabling the alpha-numeric display).
6.
Press the
PTT
key to save the new setting and activate the al-
pha-numeric Tag.
M
EMORY
M
ODE
