Page 11
FT-410 O
peraTiOn
M
anual
i
nsTallaTiOn
CAUTION
Do not position this apparatus in a location with direct exposure to sunshine.
Do not position this apparatus in a location exposed to dust and/or high humidity.
Do not expose the apparatus to dripping or splashing. Do not put objects with liquids on the
apparatus.
Ensure adequate ventilation around this apparatus, so as to prevent heat build-up and
possible reduction of performance due to high heat.
Do not install this apparatus in a mechanically-unstable location, or where objects may fall
onto this product from above.
To minimize the possibility of interference to home entertainment devices, take all
precautionary steps including separation of TV/FM antennas from Amateur transmitting
antennas to the greatest extent possible, and keep transmitting coaxial cables separated
from cables connected to home entertainment devices.
Be absolutely certain to install your transmitting antenna(s) such that they cannot possibly
come in contact with TV/FM radio or other antennas, nor with outside power or telephone
lines.
A
bout
c
oAxiAl
c
Able
Use high-quality 50-Ohm coaxial cable for the lead-in to your
FT-410
transceiver. All efforts at providing an
efficient antenna system will be wasted if poor quality, lossy coaxial cable is used. This transceiver utilizes
standard “M” (“PL-259”) type connector.
t
ypicAl
pl-259 i
NStAllAtioN
20 mm
20 mm
30 mm
3 mm
10 mm 15 mm
2 mm
