Yaesu FT-410, Руководство по эксплуатации

Страница: 23 / 31

Page 23 FT-410 O
peraTiOn
M
anual
cW M
Ode
O
peraTiOn

u
SiNG the
b
uilt
-
iN
e
lectroNic
K
eyer
Before starting, connect your keyer paddle to the front panel KEY jack in the status that turned off the [ Power
/ LOCK
] switch.
1. Press the [

]/[

] buttons to select the operating
band.
By pressing the [

]/[

] buttons, the operating
band will change as follows.
7

10

14

15

18

21

24.5

28

1.8

3.5

7 ......
2. Press the [ MODE ] buttons to select the CW mode.
3. Rotate the [ MAIN DIAL
] knob to adjust the
operating frequency.
If you use the MH-31
B8
, you may adjust the
operating frequency by the [ UP
]/[
DWN
] buttons on
the microphone.
4. Press the [ VOX] button to engage automatic
activation of the transmitter when you close the CW
key. The “BK” icon will appear in the display.
5. Press the [ KEYER
] button to activate the built-in
Electronic Keyer.
6. When you press either the “Dot” or “Dash” side of
your paddle, the transmitter will automatically be
activated and the CW carrier will be transmitted.
When your release the paddle, transmission will
cease after a brief delay.
n
OTe
:
Do not use the plug except the 3.5-mm 3-pin type plug. If the plug in correct size is not used the radio
may be harmed or damaged.
You may enable the CW keying by the [ UP
]/[
DWN
] keys of
the MH-31
B8
(while the built-in electronic keyer is engaged)
via menu item “
CW Keyer
”.
14.195.000
M-012
[MAIN DIAL]
knob
[MODE]
button
[ ▼ ]/[ ▲ ] button
[KEYER]
button
[MENU]
button
[VOX]
button
A
djuStiNG the
K
eyer
S
peed
1. Press the [MENU] button to enter the Menu mode.
The “Menu.” will appear on the display.
2. Rotate the [
MAIN DIAL
] knob to select the menu
item “
CW Speed
”.
3. Press the [ GRP
] button to enable adjustment of this
menu item.
4. Rotate the [ MAIN DIAL
] knob while pressing either
the “Dot” or “Dash” side of your paddle, so as to set
the desired keyer speed (4 - 60 wpm).
5. Press the [ GRP
] knob. The “Menu.” returns to
appear continuously.
6. Press the [MENU] button to save the new setting
and return to normal operation.
14.195.000
M-012
[MAIN DIAL]
knob
[MENU]
button
[GRP]
button