Yaesu FT-2900E, Руководство по эксплуатации

Страница: 27 / 90

23 FT-2900E O
PERATING
M
ANUAL
7. When you have made your selection, press and hold in the [ MHz
(
SET
)] key for one
second to save the new setting and exit to normal operation.
1)Your repeater may or may not re-transmit a CTCSS tone - some systems just use
CTCSS to control access to the repeater, but don’t pass it along when transmit-
ting. If the S-Meter deflects, but the FT-2900E is not passing audio, repeat steps “1”
through “3” above, but rotate the DIAL knob so that “TONE” appears - this will allow
you to hear all traffic on the channel being received.
2)You may use the Menu to re-program one of the Microphone’s programmable keys for
quick access to Menu #52 (TN FRQ), from which you can perform the above setup pro-
cedure. See page 65 for details on the setup of the programmable keys.
3)Press the [REV(DW)] key as described in procedure “6”.
You can now set the transmit CTCSS frequency. Rotate the
DIAL knob until the desired CTCSS Tone Frequency is dis-
played. “tt” is displayed at the right of the CTCSS indication.
When the [REV(DW)] key is pushed again “rt” is displayed
along with the receive CTCSS frequency.
4)When the encoder and decoder tone frequencies are dif-
ferent, a solid decoder icon and a blinking encoder icon will
be displayed.
CTCSS O
PERATION
CTCSS/DCS/EPCS O
PERATION
: Receive tone
: Transmit tone