Yaesu FT-2800M, Руководство по эксплуатации

Страница: 41 / 60

39 FT-2800M O
PERATING
M
ANUAL
B
AND
E
DGE
B
EEPER
The
FT-2800M
will automatically “beep” when the receiver’s band edge is encountered
during scanning (either in standard VFO scanning or during PMS operation). You may ad-
ditionally enable this feature (band edge beeper) when the frequency reaches the band edge
while selecting the VFO frequency manually, using the
DIAL knob.
The procedure for enabling the Band-Edge Beeper (during manual tuning) is:
1. Press and hold in the [ MHz
(
SET
)] key for one second, then rotate the
DIAL knob to
select “
12 EDG BP
.”
2. Press the [ MHz
(
SET
)] key, then rotate the
DIAL knob to set this Menu item to “
ON
.”
3. Press and hold in the [
MHz
(
SET
)] key for one second to save the new setting and exit to
normal operation.
S
CANNING