Yaesu FT-2800M, Руководство по эксплуатации

Страница: 38 / 60

36 FT-2800M O
PERATING
M
ANUAL
P
REFERENTIAL
M
EMORY
S
CAN
The
FT-2800M
also allows you to set up a “Preferential Scan List” of channels which you
can “flag” within the memory system. These channels are designated by a blinking “
SKIP
”
icon when you have selected them, one by one, for the Preferential Scan List.
When you initiate memory scanning, beginning on a channel with the Blinking “
SKIP
”
icon appended , only those channels bearing the Blinking “
SKIP
” icon will be scanned. If
you initiate scanning on a channel which does not have the Blinking “
SKIP
” icon appended,
you will scan all channels including those with the Blinking “
SKIP
” icon appended.
Here is the procedure for setting up and using the Preferential Scan List:
1. Set the radio to the Memory Recall mode by pressing the [
D/MR ( MW )] key repeatedly,
if necessary.
2. Rotate the DIAL knob to select the Memory Channel which you wish to add to the
Preferential Scan List.
3. Press and hold in the [ MHz
(
SET
)] key for one second, then rotate the
DIAL knob to
select “
25 SKIP
.”
4. Press the [
MHz
(
SET
)] key, then rotate the
DIAL
knob so as to select “
ONLY
.”
5. Press and hold in the [
MHz ( SET )] key for one second to save the new setting and exit to
normal operation.
To initiate Preferential Memory Scanning:
1. Set the radio to the Memory Recall mode by pressing the [
D/MR
(
MW
)] key repeatedly,
if necessary.
2. Rotate the
DIAL
knob to select any memory channel which has a Blinking “
SKIP
” icon
appended to the channel number.
3. Press and hold either the microphone’s [ UP
] or [
DWN
] button for one second to initiate
Preferential Memory Scanning. Only the channels which have a Blinking “ SKIP ” icon
appended to the channel number will be scanned.
S
CANNING