Yaesu FT-2800M, Руководство по эксплуатации

Страница: 21 / 60

19 FT-2800M O
PERATING
M
ANUAL
C
HANNEL
S
TEP
S
ELECTION
Tuning steps are factory preset to default increments which are appropriate for the country
to which this radio is exported. You may have a reason to use a different step size, however,
and here is the procedure for changing the channel steps:
1. Press and hold in the [
MHz
(
SET
)] key for one second, then rotate the
DIAL
knob to
select “
29 STEP
.”
2. Press the [
MHz ( SET )] key, then rotate the DIAL
knob to select the desired step size
(
5
/
10
/
12.5
/
15
/
20
/
25
/
50
/
100
kHz).
3. Press and hold in the [ MHz
(
SET
)] key for one second to save your new setting and exit
to normal operation.
D
ISPLAY
B
RIGHTNESS
The
FT-2800M
display illumination has been specially engineered to provide high visibil-
ity with minimal disruption of your “night vision” while you are driving. The brightness of
the display is manually adjustable, using the following procedure:
1. Press and hold in the [ MHz
(
SET
)] key for one second, then rotate the
DIAL knob to
select “
07 DIMR
.”
2. Press the [ MHz
(
SET
)] key, then rotate the
DIAL knob to select a comfortable brightness
level (
1
,
2
,
3
, and
OFF
).
3. Press and hold in the [
MHz ( SET )] key for one second to save your new setting and exit
to normal operation.
A
DVANCED
O
PERATION