Yaesu FT-250R, Руководство пользователя

Страница: 12 / 44

FT-250R O
PERATING
M
ANUAL
8
R
EPEATER
O
PERATION
The ARS (Automatic Repeater Shift) feature in the FT-250R provides repeater shift of
the transmit frequency whenever you are tuned to a standard repeater subband (see dia-
gram below). When enabled, a small “
– ” or “ + ” will be displayed in the upper left-hand
corner of the display, signifying that repeater shift is active, and closing the push-to-talk
switch changes the display to the (shifted) transmit frequency.
Basic Operation
Automatic Repeater Shift (ARS)
To re-enable ARS:
c
Press the [ F/L
] key, then immediately press the [
0
(
SET
)] key to enter the Set mode.
d
Rotate the
DIAL
to select Menu Item #2 (“
ARS ARS ARS ARS ARS
”).
e
Press the [ F/L
] key to enable modification of the current setting.
f
Now rotate the
DIAL
to select “ON” (to enable Automatic Repeater Shift).
g
Press the PTT key to save the new setting and exit to normal operation.
Tone Burst
For repeaters using 1750-Hz burst tone access, you can configure the switch below
the PTT to send the access tone when this switch is pressed. See page 14 for details.
Manual Repeater Shift Activation
When a repeater shift is active, either “ – ” or “ + ” appears in the display. If neither appears
when tuned to a repeater output frequency, you can activate the shift manually:
c
Press the [ F/L
] key, then immediately press the [
0
(
SET
)] key to enter the Set mode.
d
Rotate the DIAL to select Menu Item #3 (“
RPT RPT RPT RPT RPT
”).
e
Press the [ F/L
] key to enable modification of the current setting.
f
Rotate the DIAL to select the desired repeater shift direction (
-RPT -RPT -RPT -RPT -RPT
,
+RPT +RPT +RPT +RPT +RPT
or
SIMP SIMP SIMP SIMP SIMP
).
g
Press the PTT key to save the new setting and exit to normal operation.