Yaesu DR-2X, Руководство по эксплуатации, Страница: 39 / 52

DR-2X / DR-2XE Operating Manual 37
Set announcement time interval
1 Touch [ A SETUP
] or [
B SETUP
], then touch [
F
].
2 Touch [ ID ANNOUNCE
], then touch [
INTERVAL
].
The set value will change in the following sequence each time [ INTERVAL
],
[
▲
], or [
▼
] is touched.
à
“OFF”
à
“3min”
à
“5min”
à
“10min”
à
à
“15min”
à
“20min”
à
“30min”
à
“TOT”
à
3 Touch [ BACK
] 3 times.
The setting is determined and the display will return to the operation
mode screen.
z
Factory default: 10min
z
This setting item is common to CH-A and CH-B.
z
When “CW wo TONE” or “VC wo TONE” on “ANNOUNCE MODE” is set, the time interval is fixed at 10 minutes.
z
When operating in the USA, the ID setting time should be ten minutes or less to comply with the FCC rule Part 97:
Sec. 97.119 (a) Station identification.
Setting the SQL HYSTERESIS
1 Touch [ A SETUP
] or [
B SETUP
], then touch [
F
], and then touch [
TIMER
].
2 Touch [ SQL
] twice.
3 Touch [ SQL HYSTERESIS
].
The set value will change in the following sequence each time [ SQL
HYSTERESIS
], [
▲
], or [
▼
] is touched.
à
“NORMAL”
à
“HIGH”
à
“MAX”
à
4 Touch [ BACK
] 4 times.
The setting is determined and the display will return to the operation
mode screen.
z
Factory default: NORMAL
z
This setting item is common to CH-A and CH-B.
Setting the SQL TAIL LENGTH
1 Touch [ A SETUP
] or [
B SETUP
], then touch [
F
], and then touch [
TIMER
].
2 Touch [ SQL
] twice.
3 Touch [ SQL TAIL LENGTH
].
The set value will change in the following sequence each time [ SQL TAIL
LENGTH
], [
▲
], or [
▼
] is touched.
à
“0ms”
à
“50ms”
à
“100ms”
à
.....................
à
“2500ms”
à
4 Touch [ BACK
] 4 times.
The setting is determined and the display will return to the operation
mode screen.
z
Factory default: 0ms
z
This setting item is common to CH-A and CH-B.
 8 4  
D G - I D
T - O F F
R - O FF
 8 4  
D G - I D
T - O F F
R - O FF
 8 4  
D G - I D
T - O F F
R - O FF