Yaesu CT-39A, Руководство по эксплуатации

Страница: 21 / 72

19 FT-8800R Operating Manual
MH-42
B6JS
M
ICROPHONE
The MH-42
B6JS
is similar to the MH-48
A6J
, but the MH-42
B6JS
does not include a DTMF
keypad and its illumination switch.
1
PTT Switch
Press this switch to transmit, and release it to receive.
2
[
ACC
]/[
P
]/[
P1
]/[
P2
] Buttons
[
ACC
]
button : Press this button to switch the “ Main ”
band between the “ Left ” and “ Right ” displays on the
LCD screen. This is the best and easiest way to set
the “
Main ” band to the side you prefer.
Pressing and holding in this button for 1/2 second moves
operation to the next-highest frequency band on the “Main”
band.
[
P
]
button
: Press this button momentarily to switch the fre-
quency control for the “ Main ” band between the VFO and
Memory Systems.
When the “
Main ” band is set to the VFO mode, press and hold in this
button for 1/2 second to activate the Smart Search Feature.
When the “
Main ” band is set to the Memory mode, press and hold
in this button for 1/2 second to activates the “Memory Bank” feature.
[
P1
]
button : Pressing this button repeatedly allows selection of the CTCSS or DCS mode
on the “ Main ” band. The selections available are:
ENC ENC.DEC (Tone Squelch) DCS OFF ENC ......
[
P2
]
button
: Press this button momentarily to select the transmitter power output level on
the “ Main ” band (“LOW,” “MID2,” “MID1,” or “HIGH”).
When the “ Main ” band is set to the Memory mode or Home Channel, press and hold in this
key for 1/2 second to switch the memory channel display between the “Frequency” format
and “Alpha-numeric Tag” format.
You can reprogram the [
ACC
], [
P
], [
P1
], and [
P2
] buttons for other functions, if desired.
See page 53 for details.
3
LOCK Switch
This switch locks out the Microphone buttons (except for the keypad and
PTT
switch).
4
[
UP
]/[
DWN
] Button
Press (or hold in) either of these buttons to tune (or scan up or down) the operating
frequency or through the memory channels on the “
Main ” band. In many ways, these
buttons emulate the function of the (rotary) “Main” band DIAL knob.
Notice : If you change the microphone from the MH-48
A6J
to the MH-42
B6JS
or
vice versa, change the setting of Menu #23 ( MIC ). See page 64 for details.
1
2
3
4
CONDENSER MIC
MH-42
B