14
FT-8800R Operating Manual
6
“Right” Side Keys
The “
right
” side ([
LOW
], [
V/M
], [
HM
], and [
SCN
]) keys may be set to either of
two function sets via Menu #20 (
KEY.MOD
). See page 63 for the setup proce-
dure.
[
LOW
]
Key
([
MHz
]
Key
)
Key Mode “1”
([
LOW
]
Key
: Default)
Press this key momentarily to select the transmitter power output level of the “
right
”
band (“LOW,” “MID2,” “MID1,” or “HIGH”).
When the “
right
” band is set to the Memory mode or Home Channel, press and hold in
this key for 1/2 second to switch the memory channel display between the “Frequency”
format and the “Alpha-numeric Tag” format.
Key Mode “2”
([
MHz
]
Key
)
Press this key momentarily to allow tuning in 1-MHz steps on the “
Main
” band VFO.
Press and hold in this key for 1/2 second to allow tuning in 10-MHz steps on the “
Main
”
band VFO.
[
V/M
]
Key
([
REV
]
Key
)
Key Mode “1”
([
V/M
]
Key
: Default)
Press this key momentarily to switch the frequency control for the “
right
” band between
the VFO and Memory Systems.
When the “
right
” band is set to the VFO mode, press and hold in this for 1/2 second to
activate the Smart Search Feature.
When the “
right
” band is set to the Memory mode, press and hold in this key for 1/2
second to activates the “Memory Bank” feature.
Key Mode “2”
([
REV
]
Key
)
Press this key momentarily to reverse the transmit and receive frequencies on the “
Main
”
band during split-frequency (i.e. “Repeater”) operation.
Press and hold in this key for 1/2 second to change the frequency shift direction: RPT –
(minus shift), RPT + (plus shift), or RPT OFF (simplex).
[
HM
]
Key
([
TONE
]
Key
)
Key Mode “1”
([
HM
]
Key
: Default)
Press this key momentarily to recall a favorite “Home” frequency memory.
Press and hold in this for 1/2 second to activate Priority Channel Scanning.
Key Mode “2”
([
TONE
]
Key
)
Press this key momentarily to change the Tone Squelch mode: ENC (CTCSS Encoder),
ENC.DEC (CTCSS Tone Squelch), or DCS (DCS) operation.
F
RONT
P
ANEL
C
ONTROLS
& S
WITCHES
