Yaesu Contest, Руководство по эксплуатации

Страница: 32 / 54

FT
DX
9000MP/C
ONTEST
D
ATA
M
ANAGEMENT
O
PERATION
M
ANUAL
L
OG
B
OOK
F
UNCTION
L
OADING
L
OG
D
ATA
(
LOAD
)
You may load log data from a CF card into your FT
DX
9000 (for example, an archive copy, or a log from a
different transceiver). Before starting, be sure the CF card containing the log data has been inserted into the CF
Card Slot.
1. Referring to Figure 1 on page 25, press the [ 7/
18
](
LOAD
) key to engage the Save/Load mode.
2. Press the [ 5/10
](
SAVE/LOAD
) key to engage the
LOAD protocol.
3. Use the [ 1/1.8
]( ) and [
2/3.5
]( ) keys to select
the file you wish to upload to the transceiver, then
press the [
6/14
](
GO
) key to load the file.
Advice : Be sure not to delete the "extension" to the
file name, when entering the file name. A missing
extension will make it impossible to load log data
When the ERROR message “PLEASE CHECK A
DISK” is displayed at the right side of the MEM CARD
indication, please confirm that the CF card is inserted
correctly into its slot.
When memory data is loaded from the CF card, the
current memories stored in the
FT
DX
9000D will be
over-written, and the previous data is erased. We
recommend that you save and download the current
memory data to the CF card, if you want to use it
again later.
“ S
AVE
/L
OAD
” M
ODE
Page 30
“ S
AVE
/L
OAD
” M
ODE
S
AVING
L
OG
D
ATA
Log data can be saved in the supplied Compact Flash (CF) card.
1. Referring to Figure 1 on page 25, press the [ 7/
18
](
SAVE/LOAD
) key to move to the Save/Load
page.
2. Press the [ 5/10
](
SAVE
) key to choose the “Save”
protocol.
3. Input the desired FILE NAME, and press the [ 6/
14
](
GO
) key to save the data in the CF card.
Note : Be sure not to delete the "extension" to the file
name, when entering the file name. If the extension
is missing, it will not be possible to load log data
When the ERROR message “PLEASE CHECK A
DISK” is displayed at the right side of the MEM CARD
indication, please confirm that the CF card is inserted
correctly into its slot.
When memory data is saved in the CF card, any file
with the same name as the current file will be re-
vised (over-written), and the previous data will be
deleted. Please note.
Advice : The user configuration protocol (CONFIG)
allows you to specify the file format that is used for
saving log data. The available formats are:
ADIF (International Log Format) .................... adi
CSV (Cursor-Limited Values) ........................ csv
TXT (Tab-Limited Values) ............................... txt
CABRILLO ......................................... cabrillolog
(International Log Format)