Yaesu Contest, Руководство по эксплуатации

Страница: 20 / 54

FT
DX
9000MP/C
ONTEST
D
ATA
M
ANAGEMENT
O
PERATION
M
ANUAL
U
SING THE
LBWS
(
L
IMITED
B
AND
W
IDTH
S
WEEP
)
F
UNCTION
LBWS (Limited Band Width Sweep) is a function that sweeps a limited segment of the Spectrum Scope span
without changing the span (bandwidth). As the sweep segment becomes narrower, the speed becomes faster,
and the accuracy and resolution become enhanced.
The bandwidth can be set to 50 %, 30 %, or 10 % of the full span. The sweep speed will increase as follows:
50 %: about 2 times faster, 30 %: about 3 times faster, 10 %: about 10 times faster
S
PECTRUM
S
COPE
1. By pressing the [ 7/18
](
CTR/FIX
) key repeatedly,
the CTR mode and the FIX mode will be toggled
alternately.
2. By pressing the [ 2/3.5
](
SPAN
) key, you can set
the bandwidth of the span viewed using the Spec-
trum Scope.
By pressing the [
2/3.5
](
SPAN
) key, the span will
change as follows.
25 kHz 50 kHz 100 kHz 250 kHz
500 kHz 1000 kHz 2500 kHz 25 kHz ......
3. Press the [ 3/5
](
ATT
) key to set the desired at-
tenuation value.
By pressing the [
3/5
](
ATT
) key, the attenuation
will change as follows.
0 dB 10 dB 20 dB 0 dB ......
4. By pressing the [ 6/14
](
LBWS
) key, the LBWS seg-
ment width will change as follows.
NORMAL LBWS-1(50%)
LBWS-2(30%) LBWS-3(10%) NORMAL ......
5. Press the [ 4/7
](
A/B
) key to select the Main (VFO-
A) or Sub (VFO-B) VFO.
Advice :Please note that the LBWS feature can not
be used in the FIX mode. Please use LBWS only in
the CTR mode.
While LBWS is engaged, it is not possible to switch
to the dual display mode.
In the case of the Contest version, the RX switch
to the left of the CLAR/VFO-B knob will, when
pushed, cause both the VFO itself and the Spectrum
Scope display to change to VFO-B. Additionally, when
the optional RXU-9000 Dual Receive Unit is installed,
you may use the [
4/7 ]( A/B ) key to make this change,
just like on the MP version.
“FIX/CRT” Select
“LBWS WIDTH” Select
Page 18