Page 25 of 45
•
The most readable and writable data are dynamic, only sysContact, sysName and sysLocation in the
MIB-II system group are stored in the flash, and the whole Yacoub MIB is also stored in the flash.
• All other data are set to the default setting at startup.
4.2.
Web based Configuration
The etherRAIL SM series has its own web server, which allows easy configuration of the switch via
Internet using a standard browser. In the following section the possibilities of Web-based configuration
are explained step-by-step. To commission and calling the web server, please read the subchapter 2.2.3.
A change to the switch configuration must be closed with the entry of the password. Within a session,
however, the password needs to be entered only once.
4.2.1.
General Instruction
The web pages under the menu item 'General instructions' (General Instructions) contain information
about the structuring of all websites that are available on the switch (sitemap).
Currently the pages only exist in the English version. For a future German version of the web server the
translations have already been integrated into the handbook, the English designations are in parentheses
behind.
4.2.2.
Device Information
Web pages under the menu item 'Device Information' (Device Information) contain detailed
information about the current state of the switch.
Generally
The websites under 'General' (General) contain manufacturer, the software version and IP settings. The
information can be divided into user-defined data and information permanently set. The system part
(Preset information) contains information about the switch manufacturer, the used hardware, software
version and the serial number.
The user part contains the IP settings, see subsection 4.2.4.
