Page 34 of 45
Remote Diagnostics
: The remote diagnosis Website 'remote diagnostics' shows the
following information about the switch:
• Status:
The firmware works properly.
• Alarm Contact:
displays events that have triggered an alarm.
• Power Supply:
Displays the status of the power supply.
Figure 4.17.: Website ’Remote Diagnostics’
Alarm contact:
The website 'alarm contact' allows giving an alarm message if the switch is in a
critical condition.
• Use of the alarm contact:
Activating or Deactivating,
• Power supply:
Switching on or off the monitoring,
• Link Monitoring:
On or off the connection tracking.
The link monitoring can also be enabled in the port configuration table, see section 4.2.5.
The website 'utilization' shows:
• the utilization of the switch (network traffic) per port in graphical representation,
• the current runtime of the system,
• the time of the last measurement,
• the measurement interval.
Click 'Refresh' to update the measurement.
Figure 4.18.: Website ’Utilization’
RSTP Settings
:
The Website 'Rapid Spanning Tree' allows the user to configure RSTP in detail.
