Yacht Sentinel YS PRO, Руководство пользователя

Страница: 24 / 60

24
COLLECTED DATA
YS PRO only sends data when it has a 3G/4G signal. All data can be recorded for months and
sent later if it is out of range. YS Pro collects 4 types of data:
Internal YS PRO data
It includes internal alarms (geofencing, battery, tilt, temperature and G - shock alarms), 3G/4G &
GPS signal strength and Wi - Fi statistics and settings. This data is collected and sent 24/7.
Data from power cable and voltage detector
YS Pro power cable can monitor the voltage of up to 2 batteries. Alarms can be configured if the
voltage in any of these 2 batteries drop below a pre - set level.
Voltage detection allows users to visualize if the equipment is on or off. The user app allows to
know for how long it has been used and to be notified when maintenance is due.
This data is collected and sent 24/7.
Data from additional wireless accessories
Any triggers from a sensor will result in an alarm being sent by YS Pro to the app. YS Pro also
collects the Zigbee signal strength and the battery level of each sensor multiple times per day.
This data is collected and sent 24/7.
Data from NMEA 2000 and other CAN bus
If connected to a CAN bus (NMEA 2000, CANOPEN, J1939), YS Pro collects any data from the
bus when the bus is turned on. The range of NMEA 2000 data is given page 25.