Yacht Devices YDBC-05, Руководство пользователя

Страница: 26 / 40

— 26 —
Or change the magnetic variation setting to:
• 29°E for the Thermometer
• 28°W for the Barometer
The Device will produce one confirmation signal and enter programming mode.
The programming mode ends automatically 10 minutes after the Device power
is turned on. Four confirmation signals are produced at the same time. After that,
the Device returns to normal operation mode. The settings are not saved into non-
volatile memory and if the Device settings were changed at the time of programming,
they will be kept only until the Device power is turned off.
STEP 3. Programming the Device
When programming, you can customize the list of NMEA 2000 messages
containing data sent by the Device, as well as the type of the transmitted data
(for the Thermometer only, the Barometer always has the “atmospheric pressure”
data type).
Unlike the programming method described in the previous Section, this method
does not allow setting the interval for messages with periodic transmission. This
method allows turning on and off message transmission only. When transmission
is turned on, the interval specified in NMEA 2000 Standard for this message is applied
(see Appendix C).