Yaber Y31, Инструкция по эксплуатации

Страница: 8 / 116

Turn off the projector
1.Press the Power bu�on when the projector is in use, this will cause it to switch to
standby mode.
2.When the projector switch into standby mode, the light will turn red from blue
.
IMAGE ADJUSTMENT
When using the projector for the first �me, it normally displays an unclear image.
This is due to the lens being out of focus or incorrect trapezoid se�ng.
Please follow the below steps to correct:
1.Focus Adjustment
A. Rotate the focus ring slowly. At the same �me, check the resolu�on point carefully. The
best focus point for the lens would be where the image most clear.
B.Or you could rotate the lens of the projector slowly.
Focus
Note: If it is s�ll blurry, please try to adjust the projec�on distance.
EN 01 EN 05