Yaasa Lamp Classic, Оригинальная инструкция по эксплуатации

Страница: 16 / 68

16
Functions
Modes:
By pressing „
3
Mode Selection“ you can switch through four modes. The
currently selected mode is displayed under „ 1 Display Mode“.
Mode 1:
No sensor is active.
Mode 2:
In Mode 2, the lamp will automatically turn on as soon as the motion sensor
is triggered. It will light up with the previously set brightness and color
temperature value. Eight minutes after the last time the motion sensor is
triggered, the lamp goes into standby mode. In standby mode, the light is
dimmed. After another eight minutes, the lamp switches off automatically.
Mode 3:
In Mode 3, brightness is automatically regulated to keep the previously set
brightness level. The brightness of the ambient light is determined via the
daylight sensor and the brightness of the lighting is adjusted accordingly.
Mode 4:
Mode 4 combines Modes 3 and 4 – both motion and daylight sensors are active.
EN
Mode 1 No sensor
Mode 2 Motion sensor
Mode 3 Daylight sensor
Mode 4 Motion and daylight sensor