Ya-man STA-207, Руководство пользователя

Страница: 23 / 36

22
・ Change the position of the device little by little
during treatment to treat the entire area.
・ Also, move the treatment area during continual use.
・ After treating one area, remove the device from the
skin and move it to the next area.
・ The size of the treatment window is the area of skin
that can be treated at one time.
・ Do not treat the same area more than once a day.
・ Since the skin around the face contour is
susceptible to getting caught in the treatment
window, be careful not to press too strongly while
flashing.
ATTENTION
●
Continual treatment (up to 10 pulses)
* In Body mode only. Continual treatment
is not possible in Face mode.
With the power on, hold the FLASH button down for about 3
seconds until it beeps twice to turn continual treatment on/off.
Move the device over the skin with each pulse of illumination.
* Turn the device on and off while the treatment window is removed
from the skin.
・ Continual treatment will end when the device beeps 3 times
when removed from the skin for about 5 seconds during
continual treatment.
・ Each time continual treatment is used (up to 10 pulses), a
long beep will sound, and the device will enter Standby mode.
Press the FLASH button for a short time with the treatment
window pressed against the skin to resume continual
treatment (up to 10 pulses).
Standby: The mark and the OK lamp will blink.
・ During continual use, the mark will display on the indicator
panel.
・ The level cannot be changed during continual treatment.
Face contour