Ya-man EPM-18, Руководство пользователя

Страница: 14 / 32

13
Pre-testing on Skin
When using the device or a skin-care product for the first time, always test for compatibility with your skin to prevent skin problems.
Apply oil-free gel on washed skin and hold the controller on your upper arm. Make sure all 3 electrodes are in
contact with your skin and select Level 1 with your another hand, then use the device for approx. 3 minutes.
Wipe off gel and check that your skin shows no irregularities.
Continue to use the product only if your skin experiences no irregularities such as reddening or burning sensations within 24 hours.
If a rash, reddening, itchiness, stinging sensation, or other abnormality occurs at the pre-testing area, immediately stop the
pre-test and wash the affected area.
Check carefully to make sure that there are no skin abnormalities before using the device. Discontinue use of the device if you
feel unwell or notice an unusual skin reaction during use.
1
2
3
Wash the inner side of your upper arm with a soap, then wipe dry with a towel.
For usage instructions, refer to the section ‘How to apply treatment’ on page 19.
ATTENTION