13
Pretesting on Skin
1
Wash your inner
arm with a soap
and water and wipe
dry with a towel
2
3
When using the device for the first time, always test for compatibility.
ATTENTION
●
Be sure to perform a pretest in order to prevent skin problems from occurring.
●
If any abnormality, such as rash, redness, itch, or irritation, occurs on the skin where you have used the
device, stop the test and rinse off the cosmetics.
●
Use the device after carefully checking whether any abnormality occurs on the skin. If the treatment does
not agree with the skin, stop using the device.
How to hold the device and use on your skin
Hold the body of the device like the figure, place the entire electrode part on the skin, and
slowly move it in the direction of the arrows.
Skin
Apply water, lotion, or gel to
the washed body part, turn on
the switch, and use the device
in Exercise mode for approx. 3
minutes (14-15)
Be sure to test with Level 1.
Make sure that there is
nothing unusual about
your skin
Continue to use the product only if you
experience no reddening or burning
sensation on your skin within 24 hours.
