Internal 7 in 1 Drive User’s Manual
149369-02 Rev. A
Page 9
August 2002
4.3.
4.3.
4.3.
4.3.
How to connect the cables
1) Connect the 5-pin connector of the USB cable (the interface’s internal cable) to the USB
terminal inside the motherboard.
•
Pay attention to the direction of installation. See the reference illustration below.
2) Connect the FDD power connector of the PC to the Internal 7 in 1 Drive’s power
connector.
3) Connect the FDD 34-pin connector of the PC to the Internal 7 in 1 Drive’s FDD interface
connector.
No.1 Red (VCC)
No.2 White (-DATA)
No.3 Green (+DATA)
No.4 Black (GROUND)
No.5 Black (SHIELD)
*For the pin configuration, refer to
the board concerned.
USB 5-pinconnector
Internal USB terminal
USB B connector
FDD power connector
FDD I/F connector
PIN No.1
