Internal 7 in 1 Drive User’s Manual
149369-02 Rev. A
Page 5
August 2002
3.
3.
3.
3.
Features of the Internal 7 in 1 Drive
1) Hardware can be used by connecting a USB connector, a FDD connector and a power
supply connector for floppy disk drive, and software can be used only by installing device
driver software.
2) A low-profile floppy disk drive is adopted. So the Internal 7 in 1 Drive can be installed in
the space that 1 inch-height floppy disk drive can fit in.
3) The Internal 7 in 1 Drive supports the Floppy Disks formatted at 1.44MB/720KB.
4) Internal 7 in 1 Drive is a built-in unit. The reboot of Internal 7 in 1 Drive by extraction and
insertion of a cable and the separation from a system is difficult. Therefore, Internal 7 in 1
Drive has the USB Interface disconnect SW in the front bezel.
5) The Internal 7 in 1 Drive can be used in extensive environments: Windows XP, Windows
2000, Windows Me, Windows 98, and Windows 98 Second Edition.
3.1.
3.1.
3.1.
3.1.
Compatible Oses
PC
OS
Driver software
Windows XP
This product works with the standard driver in
Windows. Install the drive label driver from
the CD-ROM to use this product with the
special drive labels.
Windows 2000
Install the driver software from the CD-ROM
after installing Windows 2000 Service Pack 3.
Windows Me
This product works with the standard driver in
Windows. Install the drive label driver from
the CD-ROM to use this product with the
special drive labels.
Windows
Windows 98
Windows 98 Second Edition
Install the driver software from the CD-ROM.
NOTE:
1) When you use OS of Windows 2000, although attached CD-ROM can also install the
driver software before Service Pack 3, in order to use it in the optimal environment,
We recommend you to install Service Pack 3. Moreover, if Service Pack 3 is installed,
please re-install the driver software from CD-ROM.
