Internal 7 in 1 Drive User’s Manual
149369-02 Rev. A
Page 20
August 2002
7.2.4.
7.2.4.
7.2.4.
7.2.4.
Inserting the CompactFlash card and Microdrive
The CompactFlash card and Microdrive operates as a USB-interfaced removable disk.
1) Inserting the CompactFlash card and Mcirodrive
The CompactFlash card and Mcirodrive should be inserted into the CompactFlash card
slot located in the left-hand part of the Internal 7 in 1 Drive. When inserting the card,
push it in as far as it will go. When the card is inserted correctly, it is protruded by about
8 mm. The card slot is so designed that the card cannot be inserted except in the right
orientation.
7.3.
7.3.
7.3.
7.3.
How to operate on Windows
1) Inserting the Media (Floppy Disk, Memory Card….etc)(Mount)
If media are inserted in Internal 7 in 1 Drive, the floppy disk will turn on FDD access
LED, the memory card will turn on access LED, and access will become possible.
2) Removing the Media (Floppy Disk, Memory Card….etc)
Make sure that a file on the media is not being used by an application or being copied,
then remove the media. Even if the copy operation looks complete on the screen, the
media is sometimes being accessed. Before removing the media, check to see if the
CompactFlash or Mcirodrive
FDD Access LED
Memory Card Access LED
USB ON 1 0
