Skystream Owner’s Manual
3-CMLT-1054 Rev O XCO 1191
Pg. 19
Installing Skystream on a Tower
All towers must be provided with a ground connection that is compliant with Section 250 of the National
Electric Code, ANSI / NFPA 70.
There are several types of towers that can be used with Skystream. It is essential that Skystream is
installed on a properly engineered tower. One of the leading causes of wind generator failure is use on
a poorly designed tower.
Regardless of the tower design and height you select, there are two critical areas that must be
considered when selecting the tower. These are the stub tower height
and blade clearance; refer to accompanying figure.
Note:
The orientation of the vibration isolators is very
important. Refer to
Figures. 8, 9 & 10.
Warning:
Working on towers is dangerous and
should be left to professionals with
proper safety equipment and training.
IMPORTANT:
XZERES
Wind’s Warranty is only
extended to installations that are
made on a properly engineered
tower.
XZERES Wind reserves the right
to deny any warranty claim in
which an improperly designed
tower is used
.
Critical Turbine Blade Clearances
Содержание Skystream 3.7
