TFT Monitor Operation
Open/Close TFT Monitor
Press the ( ) button on the remote control or press the (
OPEN
) button on the front panel to
open/close the monitor.
TFT Monitor Auto Open
• If “TFT Auto Open” is “On”, when the unit is turned on, the monitor automatically opens to the
last viewing position.
• If “TFT Auto Open” is ”Off” , when the unit is turned on, press the ( ) button on the remote
control or press the (
OPEN
) button on the front panel to open the monitor into the desired
viewing position.
• If “TFT Auto Open” is ”Manual” when the unit is turned on or turned off, the monitor will not open.
See “General settings” for more instructions.
Monitor Tilt Angle Adjustment
The monitor angle can be adjusted for optimum viewing using one of the following methods:
Press the (
) or (
) buttons on the front panel to adjust the tilt angle of the screen one step
at a time.
Press and hold the (
) or ( ) buttons on the front panel to continuously adjust the tilt angle.
Adjust the “Screen Tilt” in the “Screen setting” to adjust the tilt of the screen to the desired degree.
Image Setting
Parameter adjustment procedure
1. Enter picture quality setting mode:
Press the
PIC
button on the remote control to adjust brightness or contrast.
2. Select items to set:
Press the ( / ) buttons on the remote control or rotate the
SMART DIAL
button clockwise/
anticlockwise to select an item.
3. Set parameters:
Rotate the“ VOL” on the front panel to adjust the selected feature.
4. Exit picture quality setting mode:
Press the
PIC
button on the remote control.
10
Parking Brake Interlock
1. When the “PARKING” lead is connected to the brake switch, the display on the TFT monitor will
display video
only,
when the vehicle is stopped and the parking brake is applied.
2. When the “parking brake inhibit” is active, the front monitor displays a caution message with
blue background, preventing the driver from watching video while driving to reduce the risk of a
traffic accident.
Monitor Movement Mechanism
If an obstruction occurs in the monitor path, the motion will stop automatically to prevent damage
to the mechanism or monitor. Normal operation is resumed by pressing the
(OPEN)
button or
disconnecting and reconnecting the power.
11
