If any further information is required please go to
www.xyzreality.com
or contact
39
V E R S I O N : # X Y Z - 7 2 - 0 1
D A T E O F I S S U E : 2 1 / 0 4 / 2 2
USER MANUAL
B U I L D I T R I G H T , F I R S T T I M E .
V E R S I O N : # X Y Z - 7 2 - 0 1
D A T E O F I S S U E : 2 1 / 0 4 / 2 2
USER MANUAL
Stabilising.
When touching-on
retromarkers during
calibration, place the two
stability legs (A) onto the
surface just below
the retromarker.
Touching-on.
Once stable, gently roll
the tip into the centre of
the retromarker (B) then
hold in place and calibrate
the marker’s position (as
instructed in The Atom’s
augmented reality interface).
If the tip does not touch
dead-centre reposition the
stability legs and retry.
U S I N G T H E T R I-S TA B L E N O S E
Sharp Edges
Do Not Touch
A
A
B
A
A