background image

P15

2. Tap to confirm that you want to change the 

nozzle.

 

6. Change the print head from above the 

machine. 

1.

 Tap Change Nozzle. 

3. Wait until the print head moves to a proper 

position for change. 

7. Press the white release button to separate 

the print head. 

8. Hold the print head with one hand and 

remove the bus with the other. The removal 

of the print head is completed. 

4. The position of the print head change is 

shown above. 

5. Turn off the power before changing the 

print head. 

1. Tap Clean Nozzle in the print head section.

 

2. Check if cleaning is necessary. Tap Check to clean it. 

Function Operation and Instructions 

Clean Nozzle

D2-1

Print-Head

Change Nozzle

D2-2

Print-Head

Installation sequence of new print head: 

1. Connect the bus. 
2. Press the white release button on the print head 

and assemble the print head and the mechanism. 
After attaching the print head, check to see that it 
is secure and does not shake. 

3. Turn on and use the printer. 

Note: do not touch the metal part of the print head as it becomes hot during the operation. 

3. Inset the feed hole cleaning wire 

into the feed hole and push it down-

wards to drive out the filament from 

the print head. (It is recommended 

that the operation is performed from 

the top of the machine.) 

5. Insert the print head cleaning wire 

into the nozzle from the bottom to 

clean it. 

4. Remove the filament residue from 

the print head with a wire brush. 

6. After the cleaning operation is 

completed, tap DONE. 

When the temperature of the print head reaches the operating temperature, the cleaning operation will start.

Содержание da Vinci Super





















Отзывы: