July 2016
P 4
da Vinci
Jr.2.0 Mix
Unpacking the Product
Note: please use the original power adapter and power cord along with the printer in order to
prevent product damage or safety hazards caused by differences in voltage specifications.
Open the box and remove the
accessories and cushions.
Remove the plastic bag and
the tape.
1
2
6
7
5
9
Remove all fixing tape and the
cushion between print bed and
extruder module.
Be sure to remove the
paper cardboard on the left side.
Be sure to remove the fixing
cushion on the right side.
Be sure to remove the fixing
tape at the back and front of
the print bed.
Remove the securing styrofoam and fixing tape on the print
bed.
4
3
Refer to page 5 to install the filament guide tube and
extruder, and then insert the SD card that came with
the printer into your computer or download the latest
XYZware from the official Website and install it on the
computer.
Use the USB cable to connect the printer to your
PC. Connect the power cord to the printer then
turn on the power switch.
8
