July 2016
P 3
da Vinci
Jr.2.0 Mix
• Do not place the printer in humid or dusty environment such as bathrooms and high traffic areas.
• Do not place the printer on a rickety surface and/or inclined position. Printer may fall down/or
tumble and it may cause serious injury.
• Please keep the front door closed during printing to avoid injury.
• Do not touch the interior of the printer while printing. As it may be hot and include moving parts.
Product Overview
Accessory Checklist
Important Safety Instruction for Use of Maintenance Tools
Important Safety Instruction
• The maintenance tools provided should be only handled by an adult. Please keep the tools away
from children.
• The scraper is used to remove the object from the print bed when printing has finished. The bed tape
is reusable and it can be replaced when it has worn out.
• Store the gear cleaning brush properly. This tool shall only be used to clean the specified parts of
the machine and to prevent damage to the machine should not be used to clean other areas.
．
Cleaning Brush
．
Scraper
．
USB Wire
．
Power Cord
．
Bundled filament X 2
．
Bed Tape X 3pcs
．
Power Adapter
．
Guide tube X 2
．
Cleaning Wire x 5
．
Feeding Path
Cleaning Wire x2
．
SD Card
Product Overview
．
Feeding Tube Grip X2
G
J
K
USB Port
Power Switch
Power Connector
A: Filament movement area
B: Feed module 1
C: Detector
D: Extruder
E: Filament 1
F: Print bed
G: SD card port
(Storage format: FAT32
Systems are compatible with SDHC
cards up to 32GB in size.)
H: Control and display panel
I: Front cover
J:Feed module 2
K:Filament 2
．
Extruder
