Xytronic LF-855D, Руководство по эксплуатации

Страница: 12 / 17

11
1. Ensure that the working voltage matches your power supply before beginning use.
2. Check carefully for any damage during transportation.
3. This unit contains:
A: HF-90 Soldering iron assembly with tip..
B: AC Power cord with plug.
C:Hot air gun
E:Accessories included:
a. cleaning brushes
b. 4pcs nozzles
c. iron holders
d. Hot air gun holder
OPERATING PROCEDURES
Caution: Check carefully for any damage during transportation and ensure that the
working voltage matches your power supply before plugging in the station.
1. Ensure that the base unit’s power switch is in the ‘OFF” position.
2. Plug in “Solder” wands. Put the hot air gun to the (holder)
3. Connect AC power cord to mains “In-Let”.
4. Turn switch “ POWER SWITCH” to “ON” position and the switch led will be
light.
5. All of the functions ( Soldering and Hot air gun )will work at the same time after
turning the power switch , and then the corresponding temperature LED or wind
LED display will be ON and show the value.
6. Users can turn off the the Soldering function by pressing the
key”SET+UP” ,then the corresponding LED display will show “_ _ _”.
NOTE: It means that the corresponding heater power is cut off.At this time ,the
users can only use the hot air function.
Pressing on the “
▲”on can reuse the corresponding function.
A: Soldering function / Desoldering function option
1) Press the “▲” key up until the temperature to 250
℃
(482
℉
) (If set to degrees
Centigrade, the temperature display window of the upper right corner shows
℃
, if
set to degrees Fahrenheit, the temperature display window of the upper right corner
shows
℉
).
2) Then tin the surface of soldering tips by applying a new covering of solder to
protect it.
3) You can set the desired temperature setting by pushing the “up” or “down” key.
When the temperature reaches to the desired temperature that the heating indicator