Xytronic LF-855D, Руководство по эксплуатации

Страница: 11 / 17

10
For example: F-0 → F-1 → F-2
↑ ↓
← ← ←
3. Password Setting:
When the LED displays “F-1” and flashes, press “SET” key one time and the unit
enters the Password Set status. At this moment, the LED displays the pre-set value.
Press “▲” or “▼” key to change password set value. If the user sets “000” that
means the unit will be under the status of no password. If the user sets “100” then
means the unit will be under the password status. Press “SET” key once to finish
password setting and the unit will backup mode, the user can continue set other
modes or back from the setting mode.
4. Fahrenheit and Centigrade (Celsius) temperature selection
When temperature display window shows "F-4" and blinking, press the "SET"
button, at this time, the system enters the degrees Fahrenheit and Centigrade
temperature selection function, indicating the temperature of the window shows the
current status. Press "▲" or "▼" key to change the temperature selection status. It
expressed as degrees Celsius temperature value if set to
℃
; it shows as degrees
Fahrenheit temperature if set to
℉.
OPERATING INSTRUCTIONS
NOTE: In order to protect the pump during transportation, the pump in the
machine is tightened by the 4 screws under the bottom enclosure. Please unscrew the
4 screws when the machine is used at the first time
. (See Fig. A).
Fig. A