B A S I C O P E R A T I O N
How to remove document from adhesive
Step 1:
Before inserting your document, turn
crank handle clockwise one revolution
to ensure film is wrinkle-free. Insert and
align document on feed tray. Extend
the document underneath the paddle
on the feed tray and completely into
the cartridge opening until it touches
the film/adhesive.
Step 2:
Gently guide the document
forward while turning the crank
handle clockwise.
TIP:
To save a
later trimming operation, trim off any
excess material on the leading edge
of the output (with cut blade) before
advancing completely through the
dispenser.
Step 3:
Trim to desired length using
the cut blade at the roller exit.
Apply downward pressure on the
orange blade holder and slide to the
left or right.
TIP:
To save a later trimming
operation, turn the crank to advanced the
document until the leading edge is aligned
with the upper blade bar supporting the cut
blade. Trim excess material from the leading
edge of the document. Continued to crank
document through machine and trim when
finished.
Proper Technique
• Remove the protective clear mask layer
and discard.
• Always remove the liner from the
media as shown.
