Xylem WTW UV 701 IQ SAC, Инструкция по эксплуатации

Страница: 29 / 58

UV 70x IQ SAC
Measurement / Operation
29 ba77046e02 05/2017
Default values are marked in bold.
Calibration
evaluation
The entered calibration data are checked for plausibility by the system. The
check can have the following results:
The entry of calibration values outside the measuring range leads
to a calibration error.
Menu item Settings Explanations
Cal - # raw value 1
-10000,00 ... 0,00 ... 20000,00 Raw value of the first value pair
(lower concentration).
For single-point calibration, enter 0.
Cal - ref. value 1
0,00 ... 20000,00 Reference value of the first value pair
(lower concentration).
For single-point calibration, enter 0.
Cal - # raw value 2
-10000,00 ... 0,00 ... 20000,00 Raw value of the second value pair
(higher concentration) or raw value of the
single-point calibration.
Cal - ref. value 2
0,00 ... 20000,00 Reference value of the second value pair
(higher concentration) or reference value
of the single-point calibration.
Display Meaning/actions
Measured
value display
Successful new valid calibration value pairs were entered for
the sensor.
"----" Calibration value pairs not accepted. Sensor is blocked for
measurement. A log book message is generated.
Causes:

Ascending order not observed.

At least one value is outside the measuring range.
Information on the contents and structure of the log book and how
you can call it up is given in the L
OG BOOK
chapter of the
IQ S
ENSOR
N
ET
system operating manual.
The user calibration is not recorded in the calibration history. You
can, however, view the current value pairs in the
Settings of sen
-
sors and diff. sensors
menu at any time.