Xylem WTW OxiTop-IDS, Руководство по эксплуатации, Страница: 24 / 36

Operation with OxiTop
®
-IDS measuring heads Multi 3630/3620 IDS
24
ba77045e01 09/2019
Check and, if necessary, change the settings in the Settings menu.
 Measuring range
 Bottle volume
 Sample volume
 Dilution 1 +
Quit the Settings menu with
<ESC>
.
14 Using
<F1>
/[ Meas. head ] start the assignment of a OxiTop
®
-IDS mea-
suring head to the current sample.
15 Follow the instructions on the display.
Press the
<

>
key of the OxiTop
®
-IDS measuring head (right-hand
key) and keep it depressed until the LED flashes green.
When the OxiTop
®
-IDS measuring head has been identified by the
meter, the following data of the head are displayed:
 ID (assigned at the measuring head)
 Series number of the OxiTop
®
-IDS measuring head
1 Number of the OxiTop
®
-IDS measuring head (entered at the
OxiTop
®
-IDS measuring head)
2 Series number of the OxiTop
®
-IDS measuring head
16 Confirm the assignment of the OxiTop
®
-IDS measuring head with
Accept measuring head .
or
Cancel the assignment of the OxiTop
®
-IDS measuring head with
Reject measuring head .
The Set
menu is open.
17 Assign further measuring heads of the current Sample in the Set
(repeat steps 14-16).
38 12345678
Reject measuring head
Accept measuring head
Meas. head
28.05.2019 08:00
2
1