![Xylem wtw CarboVis 701 IQ TS Скачать руководство пользователя страница 19](http://html1.mh-extra.com/html/xylem/wtw-carbovis-701-iq-ts/wtw-carbovis-701-iq-ts_operating-manual_3887668019.webp)
CarboVis 70x IQ TS
Commissioning
19
ba75950e03
05/2017
Default values are marked in bold.
Menu item
Settings
Explanations
Measuring mode
COD spectr., total
COD spectr., dissolv
TOC spectr., correl.
BOD spectr., correl.
DOC spectr., correl.
SAC 254, total
SAC 254, dissolved
UVT 254, total
UVT 254, dissolved
The measured parameter is displayed
in the selected citation form.
When changing the
Measuring mode
setting, always check the
Measuring
location
setting.
If the previously set measurement loca
-
tion is not available for the selected
measuring mode, the measurement
location is automatically changed.
Measuring location
Outlet
Inlet
Activation
Measurement location or application of
the sensor.
The possible measurement loca
-
tions are displayed depending on the
currently set measuring mode.
The sample matrix on which the cal
-
culation of the measured value is
based changes with the location of
the sensor.
The measurement location
Activation
can only be selected for
Measuring
mode
COD spectr., dissolv
.
When the measurement location is
changed, all virtual sensors are
deleted.
Measuring range
-
Display of the measuring range
(see chapter 8 T
).
Cal - # raw value 1
Value pairs of the user calibration (see section 4.3.2).
Note: Leave those values unchanged during the initial commission
-
ing.
Cal - ref. value 1
Cal - # raw value 2
Cal - ref. value 2
Number of C-sensors
1 ... 4
Apart from the main sensor, up to 4
more sensors can be displayed.
The settings for the additional sensors
are done in the menus for the respec
-
tive sensors.