Xylem SI Analytics CHEMFLOW, Руководство по эксплуатации

Страница: 6 / 20

1 Security and safety measures
6
The manufacturer does not assume any liability for damages
arising from improper or unintended use.
1.3 Danger zones and residual dangers
Flow units are connected to pipes which can be pressurized.
Process fluid can only escape in case of gross negligence or
improper operation.

Ensure prior to start-up and after every maintenance work
that all gaskets and all connections are complete and able to
function.

Take appropriate protection measures before touching the
unit since parts of the flow unit can have process
temperature.
1.4 Resources
Only use checked and approved accessories and resources.

Choose the material properties of the process gaskets
depending on the process medium.

Consider the swelling capacity and the acid or alkali
resistance of the gasketing material.

Choose a suitable sensor or a suitable unit and note the
information in the section “technical data“.
1.5 Staff
Only trained skilled workers may install and maintain the flow unit!
The operating personnel must wear suitable protective clothing
during start-up and maintenance work.
Observe the rules and regulations concerning safety at work
applicable in the country of use and at the place of use!
!!!
Gaskets
Sensor / unit
Qualification
Protective
clothing
Accident
prevention rules